1. welding
The welding head generates Ultra-high frequency vibration after moderate pressure, so the two plastic joints will create friction heat and melt instantly, and the welding
strength can be matched with the body. When we use the appropriate parts and rational interface design, watertight and gas-tight can be achieved. Also the inconvenience
caused by the use of supplements can be avoided.Thus a clean and efficient welding is finally achieved.
2. Riveting
Putting welding head under Ultra-high frequency vibration in the raised part of plastic products can make it instant hot and then melt it into riveting shape. Materials of
different texture can also mechanically be riveted together.
3. Implant
By the appropriate pressure of welding head, we can squeeze metal parts(such as nuts, screws, etc.)instantly into the reserved plastic hole ,and fix it in a certain depth. When
it is completed, pull and torque can be comparable to the the forming intensity of traditional mold ,and could avoid defects of the damage of injection mold and the slow
injection.
4. Forming
This method is similar with the riveting method. You can put the concave -shaped welding head on the outer ring of plastic products,. After the welding head makes ultra-
high frequency vibration, the plastic will melt, form and coat on the metal objects to fix. The appearance is smooth and beautiful. This method is often used in the electronics,
fix and forming of speakers, and cosmetics,and various types of lenses.
5. Spot Welding
It can make the two plastic sub-pointed without welding wire pre-designed to achieve welding. It can also make relatively large-scale parts and parts which are difficult to
design welding wire under point welding to achieve fusion, and which can spot welding points.
